A modified well index to account for shear-thinning behaviour in foam EOR simulation - IFPEN - IFP Energies nouvelles Access content directly
Journal Articles Journal of Petroleum Science and Engineering Year : 2020

A modified well index to account for shear-thinning behaviour in foam EOR simulation


An accurate evaluation of injectivity is essential to the economics of any chemical EOR process. Most commercial simulators enable non-Newtonian behaviour modelling but it is often overlooked due to inadequate grid resolution. Indeed, in cases where shear-thinning fluids are injected in a reservoir, shear rates and viscosities in the vicinity of the wellbore can be poorly estimated if the spatial resolution of the well grid-blocks is too coarse. This results in biases in injectivity and economics which we discuss here in the context of foam-based displacements. We first demonstrate that a poor evaluation of near-wellbore velocity leads to erroneously degraded injectivity on coarser grids when compared to a sufficiently refined reference grid. In order to correct these errors we propose new formulations of the well index that capture shear-thinning behaviour that the conventional Peaceman calculation fails to address. This modified well index is applied and validated in various scenarios of foam displacement simulation with radial grids. Our proposed solution, used under a simplified form as direct input in reservoir simulation, significantly enhances injectivity estimates without resorting to grid refinements or modifying the shear-thinning model of the injected foam. In most cases it yields results that are closer to those obtained using grid refinements than the Peaceman formula at a much more attractive computational cost. Additional work remains to complete our understanding of injectivity in more complex settings, especially when effects such as foam dry-out and destruction in the presence of oil are as important on sweep efficiency as its shear-thinning behaviour. Our workflow successfully corrects biases in the estimation of injectivity and yields more accurate results and avoids resorting to time-consuming methods such as grid refinements and physical input data alteration. Moreover it is simple to implement in most commercial simulators and does not require using empirical criteria. However, it bears some limitations which we also discuss.
Fichier principal
Vignette du fichier
A Modified Well Index.pdf (3.18 Mo) Télécharger le fichier
Origin : Files produced by the author(s)

Dates and versions

hal-02551338 , version 1 (22-04-2020)



Antoine Soulat, Frédéric Douarche, Eric Flauraud. A modified well index to account for shear-thinning behaviour in foam EOR simulation. Journal of Petroleum Science and Engineering, 2020, 191, pp.107146. ⟨10.1016/j.petrol.2020.107146⟩. ⟨hal-02551338⟩


54 View
84 Download



Gmail Facebook X LinkedIn More